Advanced Working Belt -
Online Tool Belts
Free Shipping on all orders
w/in the U.S.A.!
Most Advanced Tool Belts & Suspenders!!
The Advanced Tool Belt is a
new state of the art tool belt, it's like no other tool belt
you have ever worn. The Advanced cam buckle allows the belt to
easily be adjusted to any increment from 1/64 of an inch all the way
to 11 inches and any increment in between. Unlike other work belts
that have pre-set holes 1"-2" apart which makes getting the belt to
a perfect tightness almost impossible. To tighten the Advanced Tool
Belts simply pull on the cam buckle strap using only one hand,
leaving your other hand available for holding and working.
loosen the belt simply push on the cam buckle's spring loaded lever.
Once the Advanced Working Belt has been tightened
comfortably around your waste, you will never need to re-set it
again when taking the belt on and off. You simply undo the buckle to take off the belt (keeping the same settings) to put the belt back on you simply place it around
your waste and snap the buckle together, unlike other belts that
have the preset holes 1"-2" apart that require you to look down and
feel to make sure you get the belt loop tongue inserted into the
correct hole every time, real hassle: especially if your stomach or
clothes are in the way. Belts with preset holes 1"-2" apart never
fit perfect, leaving you with no choice but to get a hole puncher
and making a new hole to get the perfect fit, which ends up
stretching and eventually ripping into the next closest hole leaving
the belt useless. With the Advanced Working Belt you don't have to
worry about this, the cam buckle never wears out and belt lasts 10
times longer than any other work belt.
Working all day with a set
of heavy tool bags on your waist, that are constantly sagging and slipping due to the weight of
all the tools and fasteners, always having to pull them back
up around your waist, gets extremely annoying! This is why most people don't look
forward to putting there tool bags on when they go to work! Leather work belts have pre-set
holes in them with
increments about an
1"-2" apart, once you
find the right set of holes that fits you best making the belt the
right tightness, if you happen to get this lucky, there either to loose or to
tight, if you do, over time this set of holes gets worn and
the belt will also start to
stretch making it loose due to all the weight, and the next set of pre-holes are to tight on you. Now you are stuck with a belt that
doesn't fit you right, leaving you with no option but to buy another new
work belt that will due the
same thing again. We'll
we have designed a belt that cures all the above mentioned problems and
is even twice as comfortable.
Advanced Working Belts cures all these problems by
allowing you to be able to adjust the belt with a simple one
handed pull of the strap to the desired tightness and never worrying about it becoming loose,
Guaranteed to never
slip. No matter what!! If you feel you need to get it just a
little bit tighter say 1/8"-1/4" any increment just pull on the the
strap to the desired tightness. Which is impossible with any other belt
sold. To loosen the belt simply push the cam buckle lever. Once the
advanced work belt has been set to the correct tightness you can keep it
to this setting even when you take it off and put it back on. To take
the belt off just release the buckle (keeping the same cam buckle
setting) when it is time to put the belt back on simply pull it up
around your waist and snap the buckle keeping the same cam buckle
setting, this eliminates having to bend over and look to see if the belt
is going to be connected in the correct hole as is the case with most
every other work belt. To top it off the advanced working belts are
extremely comfortable and light weight.
Also the belt will last nearly for ever, the webbing is super
tough. Once you wear this belt we guarantee
you will never use another belt. This belt is so superior to any other
work belt it has a PATENT
PENDING with the U.S. Government.
some pictures of some of the key features that make the
Advanced Working Belt the Worlds Most Advanced Tool Belt!!
To tighten the belt simply pull
the strap coming through the Cam Buckle. The Advanced Working belt
will tighten to any increment as little as 1/64" all the way to 10".
Simply pull the strap until the belt is tight around your waist. As
shown here in this picture! Easy!!
Guaranteed to never
To loosen the Advanced Working
Belt, simply push on the cam buckle lever. As shown here in these
Once you pull on the strap going through the
cam buckle that tightens the Advanced Working Belt (as shown in the
picture above) to the correct tightness, you will never need to
adjust it again when taking the belt on and off, simply un-snap the
belt buckle to take the belt off and then re-snap the belt buckle to
put the Advanced Working Belt back on. Never needing to look down to
find the holes to put the buckle tongue into as you do with all
other tool belts. Simply un-snap the buckle and then re-snap it.
As shown in the picture below.
The Advanced Working Belt below has already
been tightened to the correct tightness, now all you have to do to put the
Advanced Working Belt back on is simply snap the buckle, no fumbling looking down trying to find the
correct hole to get the buckle tongue into.